Part
Number
Description
Photograph
Price In
Sing
Dollars
90072
500 Piece 9/16" Long, 7/16'' Crown Staples
Item # 90072

For use with our 120V, 18 Gauge Stapler/Brad
Tacker.

Crown: 7/16"
Length:  
Gauge: 18
Quantity: 500
12.00
90287
Drill Bit Sharpener - Electric


Sharpen bits without the use of a drill.
Self-contained unit sharpens sizes from 9/64" to
25/64" on both carbon steel and high speed steel
drill bits.
Comes with 120 grit sharpening wheel
120 volts, 60 Hz, 70 watts 1600 RPM Direct drive
Power cord: 6 ft. 6" Overall dimensions: 4-3/4" L x
5-1/2" W x 9-1/16" H Weight: 4.35 lbs.
SPECIAL NOTE
This runs on 120v input voltage. You may
need a step-down transformer if the
available input voltage is 220v
160.00
90718
Aviation Tin Snips - Heavy Duty Straight Cut

For heavy duty sheet metal cutting.
High carbon steel construction
Double-dipped polypropylene and TPR grips
Thumb lock
Length of cut: 3-1/8", Overall length: 11-5/8"
50.00
90764
32 Piece Screwdriver Set
Item # 90764

Heat treated carbon steel shanks
Soft grip handles
Includes: Fourteen screwdriver bits (Four slotted,
six Phillips and four hex)
Four slotted screwdrivers
Three Phillips screwdrivers
one combo 1/4" nut driver/pick up tool
one flexible 1/4" nut driver
one pocket screwdriver circuit tester AC
100-250V with pocket clip
one 1/4" nut driver with magnetic T-handle and
seven swivel screwdrivers
25.00
90899
7 Function Digital Multimeter
Item # 90899

Get accurate readings for DC voltage, DC
current, AC voltage, resistance, transistor test,
diode test, and battery test. Easy-to-read LCD
readout, positive set selector switch and 32" leads.

Automatic zero adjust
Overange indicator
2.5x second sample time
Low battery indicator
Fuse and diode protected circuit
DC-A: 0-200�
A-2000�
A-20mA-200mA
Resistance: 0-200-2000-20K-200K-2000K ohm
DC-V: 0-200mV-2000mV-20V-200V-1000V
AC-V: 0-200-750V
25.00
91178
     
       
       
91512
     
91545
     
91616
3 Piece Titanium Nitride Coated High Speed Steel
Step Drills
Item # 91616

Just 3 "Step" Drill Bits can drill 28 different hole
sizes
3 piece set of titanium nitride coated, high speed
steel bits replaces 28 individual drill bits. That
means you don�t have to constantly change bits
when drilling the range of holes necessary on a
countertop, for instance, so you can speed-up
installation of kitchen/bath fixtures.

Titanium nitride coating for cooler running
High speed steel for longer life
Automatically deburrs holes as you drill
Two-flute design gives you faster, smoother
cutting
Quick-change 1/4" hex shank
Sizes: 3/16" to 1/2" Six Step Bit (3/16", 1/4", 5/16",
3/8",7/16", 1/2")
1/4" to 3/4" Nine Step Bit (1/4", 5/16", 3/8", 7/16",
1/2", 9/16",5/8",11/16",3/4")
1/8" to 1/2" Thirteen Step Bit (1/8", 5/32", 3/16",
7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32",
7/16", 15/32", 1/2")
50.00
92061
Camping Flashlight
Item # 92061

Four interchangeable lenses: red, green, yellow,
white
Outer lens cap holder
Black oxide belt clip holder
Built-in compass
ABS frame
Push-button switch
90� angled head
Comes with two krypton bulbs
Runs on two AA batteries, not included
Overall dimensions: 6-1/2" H x 2-5/16" L x 1-5/8"
W
9.00
92077
Aluminum Hook - Jumbo Size

Heavy duty anodized aluminum
Cushion grip for a better hold Spring-loaded snap
Color may vary. Max. clip opening: 1-1/4''
Overall dimensions: 5-1/2'' L x 3-1/4'' W x 3/4'' T
10.00
92300
     
92352
     
92625
Wool Blanket - 60" x 80"


Soft Wool Blend
Mixed blend of 80% wool and 20% polyester is
soft to the touch
Will keep you warm in any weather condition- wet
or dry
Loom woven with double stitched edges for
durability
Overall dimensions: 80" L x 60" W x 1/8" T
Weight: 3 lbs.
70.00
92688
Battery Cut-Off Switch

Prevents battery drain when the vehicle is in
storage Deters theft
Brass terminals
100 amp capacity @ 12 volts (1000 amp surge)
50 amp capacity @ 24 volts (500 amp surge)
18.00
92825
"Suction-Cup" Lifter - Aluminum

LIFTS UP TO 110 LBS.!
110 lb. maximum lifting capacity
Durable aluminum handles and housing
Single stroke pump action
4-5/8'' suction cup diameter
32.00
92887
Sharpening Stone Set - 3 Pieces


Alumina plus carborundum composite stones are
ideal for sharpening knives, tools and saw blades
Fast cutting action wet, or with oil
120, 280 and 600 grit
Nylon pouch for storage
6" long
21.00
92939
     
92940
     
92941
     
93199
     
93206
     
93293
6" Composite Digital Caliper
Item # 93293

Rugged impact-resistant composite material
Easy-to-read metric and SAE LCD display
Low battery warning
12 month average battery life
1.5V button cell battery included.

Accuracy: +/- 0.001'' (0.2 mm), Resolution: 0.01'',
Throat depth: 1-9/16'', Temperature operating
range: 32� F to 104� F,Overall length: 9-1/2''
30.00
93313
8" LED Flashlight
Item # 93313

Four super-efficient white LED lamps make your
batteries last 10 to 20 times longer than
incandescent bulbs.

Lightweight aluminum construction
Shatter resistant lens
Removable lanyard
Knurled handle for secure grip
Uses three AA batteries (sold separately).

Overall dimensions: 0.789" diameter x 8" L
Weight: 0.15 lbs. (without batteries)
18.00
93323
     
93324
     
93326
200 Piece Self-Drilling Screw Assortment
Item # 93326

These screws have super sharp tips to seat faster
than standard screws - no need to drill pilot holes!

Self tapping
Zinc-plated carbon steel
Super sharp point
Contents: #8-18 x 1/2'' (30 pcs), #8-18 x 5/8'' (30
pcs), #8-18 x 3/4''(30pcs), #8-18 x 1'' (30 pc.)
#10-16 x 1/2'' (20 pcs), #10-16 x 5/8'' (20 pcs),
#10-16 x 3/4'' (20 pcs), #10-16 x 1'' (20 pcs)
packaged in poly case
30.00
93340
12" Heavy Duty File Set


Double-cut, serrated design pattern for efficient
filing
Forged, milled and heat-treated steel construction
for strength
Rubber grips with polyurethane core for durability
and comfort
Includes tapered flat mill file, round bastard file,
half round bastard file, and tapered triangular mill
file
Overall weight: 3.4 lbs.
55.00
93342
Countersink 1/2" Six Flute

Ideal for chamfering, deburring and
countersinking. Six flute design provides small
chip loads and quicker removal.

Chrome vanadium steel construction
1/4" hex shank
45° chamfer
2000 RPM max., Overall length: 1-3/8"
9.00
93483
Drill-Powered Drum Auger - 15 Ft.


Use your power drill to unclog drains.

15 foot spring steel cable reaches past traps to
remove most clogs 1/4" drill shank Rugged poly
housing 4" handle with knob for manual use
Drill M/C is not included..
200 RPM max. speed 5-3/8" diameter drum
Weight: 1.5 lbs.
67.00
93542
     
93543
Digital Pocket Scale

This compact unit measures weights to 17.64
ounces (500 grams).
Measures in grams, ounces, troy ounces and
pennyweight High resolution Easy-to-read LCD
display Functions include: tare/zero, unit and
pieces Lower power consumption Auto-off to
preserve battery life Folds compactly for storage
Uses two AAA batteries (included).
Overall dimensions: 2-7/8" W x 4-15/16" L x 1" H
60.00
Part
Number
Description
Photograph
Price In
Sing
Dollars
93684
6" Stainless Steel Pocket Ruler
Item # 93684

Corrosion resistant stainless steel construction
Etched, black easy-to-read graduations in 32nds
and 64ths
Reverse side has decimal equivalent chart
Sliding pocket clip doubles as a depth gauge
5.00
93712
4" Nine LED Mini Flashlight
Item # 93712

Nine superbright LEDs give this pocket light plenty
of power.

90,000 micro candella (mcd) output
Lamp life up to 100,000 hours
Compact, rugged construction
Attached lanyard
Requires 3 AAA batteries, sold separately.

16.00
93714
Wheel Covers -4 Pieces Cotton Canva Coverss

Protect your tires against oil, dirt, grease, sun and
moisture when parked for a long time.

Fits tires up to 24" diameter x 8" wide
Natural cotton canvas with tan piping
Set of four covers.
30.00
93813
     
93814
     
93906
     
93941
     
93980
Bearing Separator and Puller Set

Two of the most widely used 2" and 3" bearing
splitters, along with pulling components to safely
remove bearings.

Four sets of hex push-puller legs
4" and 5" extension legs
6" yoke with center adapter
Bar-type puller head with 9/16" forcing screw
Rugged drop-forged construction
Comes with blow mold case.
Shipping weight: 10.8 lbs.
250.00
94185
Pencil Torch
Item # 94185

This remarkable pencil torch allows you to control
a blistering 2000�F with pinpoint accuracy at any
angle. It runs on standard butane and burns for up
to 15 minutes on one filling. Ideal for soldering,
brazing, heating pipes, and more.

2000� F maximum temperature
Up to 15 minutes burn time
Aluminum body
Brass torch tip
Burn tip diameter: 0.310", Overall dimensions: 7-
7/8" L x 1/2" W
15.00
94233
     
94289
     
94367
Magnifying Glass-  3x With 8 LED Lamp


Get a close view of stamps, coins, small parts and
hobbies. Bright LED lamp illuminates details.
3x magnification 2-1/8" diameter glass lens
Compact and lightweight Zinc alloy finish
Requires two AA batteries, included.
Light source: 8 LEDs Magnification: 3x . Lens
diameter: 2-1/8"Overall dimensions: 8-3/8" L x
3-1/8" W x 15/16" H
55.00
94447
6 Piece Technical Measuring Set
Item # 94447

Everything you need for making accurate technical
measurements.

Slide lock holds readings
6'' calipers are carbon steel with hardened
fulcrum, spring, and points
6'' stainless steel ruler with pocket clip
6'' spring divider
6'' spring outside caliper
6'' spring inside caliper
6'' depth gauge
5'' analog caliper
39.00
94450
Battery Terminal Cleaner


Tapered brush scours inside of battery clamps
Terminal cleaner removes corrosion
High impact body is ribbed for secure grip
Overall dimensions: 3-1/4" L x 1-1/2" diameter
10.00
94456
18 Divider Storage Container
Item # 94456

Durable PVC construction
Transparent for viewing contents
Latches snap securely
Fasteners not included.

Individual dividers: 1-3/8" L x 1-7/16" W x 1-1/8"
deep
Overall dimensions: 9-1/8" L x 4-7/8" W x 1-5/16" H
10.00
94460
74 Piece Clevis Pin Assortment
Item # 94460

Replace worn retaining bolts or pins
Zinc plated to resist rust
37 assorted pins, 37 matching clips
8 pin adjustments for a perfect fit
Organized storage case
Pin sizes: fifteen 1/4" x 2", ten 5/16" x 2", four 3/8"
x 2", four 7/16" x 2", four 1/2" x 2"
40.00
94552
     
94581
     
94607
Screwdriver Set , 8 Pieces, Professional


Slotted and Phillips head screwdrivers with
magnetized tips
TPR handles for secure grip
Chrome vanadium shanks
5/16" x 6" slotted, 1/4" x 5" slotted, 0.19" x 4"
slotted, 1/4" x 1-1/2" slotted, #2 x 5" Phillips, #1 x
4" Phillips, #0 x 3" Phillips, #2 x 1-1/2" Phillips
40.00
94645
Mortise Gauge - 6"

Specialized tool for marking mortise lines and
other layouts. Brass inserts with locking screw and
mortise size adjustment. Hardened single marking
spurs. Double pins for mortise layout
Constructed from machined brass, polished
rosewood with steel pins
Overall dimensions 8-7/16" L x 2-1/8" x 2-1/2"
35.00
94650
Hex Key Set - 17 Pieces SAE/Metric


Super-tough chrome vanadium construction
Handles provide additional leverage
SAE sizes: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32",
3/16", 7/32", and 1/4". Metric sizes: 1.5m, 2mm,
2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm
21.00
94733
Inline Desiccant Dryer/Filter


Removes water vapor, dirt, dust and oil vapor
Changes from blue to pink when the filter needs
changing
Air inlet: 1/4" NPT female
Air outlet: 1/4" NPT female
90 PSI max working pressure
30.00
94739
     
94903
     
94963
Angle Finder

Ideal for calculating angles in slope construction,
such as stairs, roof rafters and window frames.

Can be used as a regular level, a T-square and a
sliding set square which can calculate depth
The vial can easily be transferred to any position
along the angle arm
Dimensions: 11-3/4"L x 6- 3/8"H
30.00
95000
Solar Charger - 18 Volt to 24 Volt


Portable folding design
Built-in blocking diode to prevent battery discharge
Charging indicator LED
Easy to transport with built-in handle
Cordless drill sold separately.

Overall dimensions: 6-1/8"L x 18-1/8"H x 23-1/4"W
Power cord length and plug type: Two way
insulated plug, 10 ft. length
500.00
95276
LED Motion Sensor Light
Item # 95276

Great for sheds, closets, and stairwells where an
electric outlet is not available.

Super bright LED lamp lasts up to 50 times longer
than standard bulbs
Can be used in auto continuous and off positions
Ideal for night light and security
Saves energy in auto mode
Operates on four AA batteries (not included)
Overall dimensions: 1-5/8" L x 3-1/4" W x 4-5/8" H
Three way switch: continuous, auto and off
22.00
95286
     
95342
Pen-Style Digital Multimeter
Item # 95342

LCD display with digital readout for easy viewing
Data hold
Overload protection
Auto ranging and auto-off
Durable ABS housing
29" lead with 5.8" probe
Tests AC/DC voltage, AC/DC current, resistantce,
capacitor test, diode and continuity test, polarity
50.00
95520
     
95543
     
95638
     
95683
     
95695
2 Piece Measuring Tool Set
Item # 95695

Lightweight and compact set includes line level,
scriber and one aluminum square rule.

Ruler measures 45� and 90� angles
Comes with line level and aluminum square ruler.
20.00
95799
12 Volt LED Mini Spotlight with Magnetic Base
Item # 95799

17 long-lasting LED lamps for bright illumination
Magnetic base clamps to any ferrous surface
Three lamp modes: constant light, rapid flash,
interval flash
12 volt cigarette lighter plug with retractable 6 ft. 9"
cord
Overall dimensions: 2-13/16" L x 2-1/2" W
20.00
       
HARBOR TOOLS
SERIES  9  PAGE 1
(Volume Discount Available at 10% of every S$100 Purchase)