| SHERLINE MINIATURE MACHINES |
SHERLINE MINI LATHES and MINI MILLING MACHINES -PRICE LIST
LATHES
SHERLINE MACHINE TOOLS AND PACKAGES PRICE LIST (Effective October 1, 2003)
1.STANDARD EQUIPMENT: Sherline lathes include the following as standard equipment: 90 VDC motor w/ electronic speed
control, faceplate, drive dog, tool post, pre-sharpened 1/4" high speed steel (HSS) cutting tool, #0 and #1 Morse dead
centers, 4 hex adjustment keys, 2 spindle bars, laser engraved aluminum hand-wheels and 48-page color instruction
manual. Sherline machines operate on any incoming current from 100 to 240 VAC, 50-60 Hz without an external
transformer. All machines and accessories come with a 1-year limited warranty.
2.DIGITAL READOUTS: Any Sherline lathe or mill can be ordered with factory installed Digital Readouts (DRO). Lathes
include 2 encoder hand-wheels on the cross-slide and lead-screw,. Mills include 3 encoder hand-wheels for X, Y and Z
axes. Electronics box includes 3-axis LED readout plus an encoder for continuous readout of spindle RPM. DRO hand-
wheels replace the standard hand-wheels, so in the case of the 4400-series lathes and 5400 and 2000-series mills, the
DRO hand-wheels replace the adjustable “zero” hand-wheels. Electronics can be initialized to work with either inch or
metric machines. 110VAC power supply included. Machines equipped with DRO are denoted by the machine or
machine/accessory package part number followed by the letters “DRO”.
CNC-READY MACHINES: Any Sherline lathe or mill can be ordered with stepper motor mounts in place of the hand=wheels
ready for the installation of NEMA 23 size stepper motors. (Stepper motors, drivers and software are not included.)
Hand=wheels are included for use on the rear shaft of dual shaft stepper motors, but the stepper motors must be
installed before manual control can be achieved. Machines equipped with stepper motor mounts are denoted by the
machine or machine/accessory packages part number followed by the letters “CNC”. See the CNC Price List for additional
CNC components like a driver box and stepper motors. Complete CNC systems including a computer are also available.
A. SHERLINE Lathes
B. SHERLINE LATHE AND ACCESSORY PACKAGES
Sherline lathes can be purchased with three different selections of most popular accessories. Purchasing a
machine/accessory package offers additional price savings compared to purchasing the machine and accessories
separately. The A, B and C packages are described below. Machines in these packages can also be ordered with factory
installed Digital Readouts (DRO) or with stepper motor mounts ready for the application of CNC controls.
1. 4000A (4100A Metric):3.5" x 8" lathe and standard equipment PLUS
2.5" 3-jaw and ¼" tailstock drill chuck:25:US$675+10%+GST
2. 4000A-DRO (4100A-DRO Metric):3.5" x 8" lathe “A” package PLUS factory installed DRO (Digital Readout) on crosslide
and leadscrew:28lbs:US$1000+10%+GST
3. 4000A-CNC (4100A-CNC Metric):3.5" x 8" lathe “A” package PLUS 2 stepper motor mounts installed on lathe ready for
CNC control:28lbs:US$855+10%+GST
4. 4000B (4100B Metric):3.5" x 8" lathe and standard equipment PLUS
items listed above in “B” package:31lbs:US$850+10%+GST
5. 4000B-DRO (4100B-DRO Metric):3.5" x 8" lathe “B” package PLUS
factory installed DRO (Digital Readout) on crosslide and leadscrew:34lbs:US$1175+10%+GST
6. 4000B-CNC (4000B-CNC Metric):3.5" x 8" lathe “B” package PLUS 2 stepper motor mounts installed on lathe ready for
CNC control:34lbs:US$1050+10%+GST
7. 4000C (4100C Metric):3.5" x 8" lathe and standard equipment PLUS
items listed above in “C” package:34lbs:US$1090+10%+GST
8. 4000C-DRO (4100C-DRO Metric):3.5" x 8" lathe “C” package PLUS factory installed DRO (Digital Readout) on crosslide
and leadscrew:37lbs:US$1415+10%+GST
9. 4000C-CNC (4100C-CNC Metric):3.5" x 8" lathe “C” package PLUS 2 stepper motor mounts installed and ready for CNC
control:37lbs:US$1290+10%+GST
10. 4500A (4530A Metric):3.5" x 8" lathe with adjustable “zero” handwheels PLUS 2.5" 3-jaw and ¼" tailstock drill chuck:
25lbs:US$720+10%+GST
11. 4500B (4530B Metric):3.5" x 8" lathe with adjustable “zero” handwheels PLUS “B” accessory package described above:
31lbs:US$900+10%+GST
12. 4500C (4530C Metric):3.5" x 8" lathe with adjustable “zero” handwheels PLUS “C” accessory package described above:
34lbsUS$1145+10%+GST
14. 4400A-DRO (4410A-DRO Metric):3.5" x 17" deluxe lathe “A” package PLUS factory installed DRO (Digital Readout) on
crosslide and leadscrew:36lbs:US$1095+10%+GST
15. 4400A-CNC (4410A-CNC Metric):3.5" x 17" deluxe lathe “A” package PLUS 2 stepper motor mounts installed and ready
for CNC control:36lbs::US$980+10%+GST
17. 4400B-DRO (4410B-DRO Metric):3.5" x 17" deluxe lathe “B” package PLUS factory installed DRO (Digital Readout) on
crosslide and leadscrew:39lbs:US$1280+10%+GST
18. 4400B-CNC (4410B-CNC Metric):3.5" x 17" deluxe lathe “B” package PLUS 2 stepper motor mounts installed and ready
for CNC control:39lbs:US$1160+10%+GST
19.4400C (4410C Metric):3.5" x 17" deluxe lathe PLUS items listed in
“C” package on previous page:41lbs:US$1220+10%+GST
20. 4400C-DRO (4410C-DRO Metric):3.5" x 17" deluxe lathe “C” package PLUS factory installed DRO (Digital Readout) on
crosslide and leadscrew:44lbs:US$1515+10%+GST
21. 4400C-CNC (4410-CNC Metric):3.5" x 17" deluxe lathe “C” package PLUS 2 stepper motor mounts installed and ready
for CNC control:44lbs::US$1400+10%+GST
MILLING MACHINES
C. SHERLINE VERTICAL MILLING MACHINES
DIGITAL READOUTS and CNC-READY MACHINES: All Sherline machines can be ordered equipped with DRO or CNC stepper
motor mounts. See note at top of previous page.
1. 5000 (5100 Metric)Vertical milling machine w/ 10" base:36:US$650.00+10%+GST
2. 5000-DRO (5100-DRO Metric)Vertical milling machine w/ 10" base PLUS factory installed DRO (Digital Readout) on X, Y
and Z axes:39lbs:US$1025.00+10%+GST
3. 5000-CNC (5100-CNC Metric):Vertical milling machine w/ 10" base PLUS 3 stepper motor mounts ready for CNC control:
39lbs::US$880.00+10%+GST
4. 5400 (5410 Metric):Deluxe vertical milling machine w/ 12" base, adjustable “zero” handwheels, 1297 headstock spacer
block, 3072 1/4" Jacobs drill chuck and laser engraved scales (rulers) on base and table:38lbs:US$775.00+10%+GST
5. 5400-DRO (5410-DRO Metric):Deluxe vertical milling machine as above PLUS factory installed DRO (Digital Readout) on
X, Y and Z axes:41lbs:US$1120.00+10%+GST
6. 5400-CNC (5410-CNC Metric):Deluxe vertical milling machine as above PLUS 3 stepper motor mounts ready for CNC
control:41lbs::US$1005.00+10%+GST
8. 2000-DRO (2010-DRO Metric):2000-series vertical mill as above PLUS factory installed DRO (Digital Readout) on X, Y and
Z axes:48lbs::US$1340.00+10%+GST
9. 2000-CNC (2010-CNC Metric):2000-series vertical mill as above PLUS 3 stepper motor mounts ready for CNC control:
48lbs::US$1225.00+10%+GST
D. SHERLINE MILLING MACHINE AND ACCESSORY PACKAGES
Sherline mills can be purchased with a selection of our most popular accessories. The A package is described below.
Machines in this package can also be ordered with factory installed Digital Readouts (DRO) or ready for the application of
CNC controls. Purchasing a machine/accessory package offers additional price savings compared to purchasing the
machine and accessories separately.
1. 5000A (5100A Metric):Standard 3-axis mill with 10" base (Save $45.00):
44lbs:US$950.00+10%+GST
2. 5000A-DRO (5100A-DRO Metric):Standard mill with factory installed DRO (Digital Readout) on X, Y and Z axes, spindle
RPM readout:47lbs::US$1325.00+10%+GST
3. 5000A-CNC (5100A-CNC Metric):Standard mill with 3 stepper motor mounts installed ready for application of CNC motors
and controls:47lbs::US$1180.00+10%+GST
4. 5400A (5410A Metric):Deluxe 3-axis mill with 12" base, adjustable “zero” handwheels, 3072 ¼" drill chuck, 1297
headstock spacer block and laser engraved scales on base and bed:45lbs::US$1020.00+10%+GST
5. 5400A-DRO (5410A-DRO Metric):Deluxe 3-axis mill as described above PLUS factory installed DRO on X, Y and Z axes,
spindle RPM readout:48lbs::US$1365.00+10%+GST
6. 5400A-CNC (5410A-CNC Metric):Deluxe 3-axis mill as described above PLUS 3 NEMA 23 stepper motor mounts ready for
application of CNC:48lbs::US$1250.00+10%+GST
7. 2000A (2010AMetric):8-direction mill with 14" base, adjustable column
and ram for four additional axes of movement in addition to X, Y, Z and
headstock rotation, ¼" drill chuck:52lbs:US$1240.00+10%+GST
8. 2000A-DRO (2010A-DRO Metric):8-direction mill PLUS factory installed DRO (Digital Readout) on X, Y and Z axes:55lbs::
US$1585.00+10%+GST
9. 2000A-CNC (2010A-CNC Metric):8-direction mill PLUS 3 NEMA 23 stepper motor mounts and RPM gage ready for
application of CNC:55lbs::US$1470.00+10%+GST
LATHE & MILLING MACHINE COMBO PACKAGES
E. SHERLINE COMPLETE MACHINE SHOP LATHE, MILL AND ACCESSORY PACKAGES
Sherline mills and lathes can be purchased together along with a selection of Sherline’s most popular shop accessories
to put together a complete machine shop with just one simple order.
6000 SHOP PACKAGES INCLUDE: 4400-series deluxe lathe and 5400-series deluxe vertical mill PLUS the following
accessories:1040 3.1" 3-jaw chuck, 1069 3/8" Jacobs drill chuck, 1074 Steady rest, 1191 Live center, 3002 Cutoff tool and
holder, 3007 3-piece HSS cutting tool set, 1297 mill spacer block, 3013 Step block hold-down set, 3020 5/32" T-driver, 3021
3-piece center drill set, 3052 Fly cutter, 3054 Boring head, 3060 3-piece mill collet set, 3063 Boring tool, 3072 ¼" Jacobs
drill chuck, 3079 3/8" end mill holder, 3551 mill vise, 3700 4" Rotary table, 3750 Tilting angle table, 5327 Sherline
Accessories Shop Guide book, 5330 Safety glasses and 7400 6-piece 3/8" double-ended end mill set. Save $167.00
compared to buying machines and accessories separately.
NOTE: The manual P/N 3700 rotary table is included with CNC-ready packages. To upgrade to CNC-ready rotary table
without motor, specify the P/N 3700-CNC rotary table and add $50.00. For a rotary table with stepper motor already
installed specify P/N 8730 and add $125.00.
6200 SHOP PACKAGES INCLUDE: All items mentioned above except substitute 2000-series mill in place of 5400-series mill.
Save $167.00 compared to buying machines and accessories separately.
1. 6000 (6010 Metric):4400-series lathe, 5400-series mill PLUS accessories listed above. A complete machine shop in
miniature!:93lbs:US$2400.00+10%+GST
2. 6000-DRO (6010-DRO Metric):6000-series shop package above with both machines fitted with factory installed Digital
Readouts:99lbs::US$3045.00+10%+GST
3. 6000-CNC (6010-CNC Metric):6000-series shop package with both machines fitted with stepper motor mounts in place of
handwheels:99lbs::US$2810.00+10%+GST
4. 6200 (6210 Metric):4400-series lathe, 2000-series 8-direction mill PLUS accessory package listed above.:98lbs::
US$2675.00+10%+GST
5. 6200-DRO (6210-DRO Metric):6200-series shop package above with both machines fitted with factory installed Digital
Readouts:104lbs::US$3320.00+10%+GST
6. 6200-CNC (6210-CNC Metric):6200-series package above with both machines fitted with stepper motor mounts in place
of handwheels:104lbs:US$3085.00+10%+GST
7. 8775:Upgrade either 6000-CNC or 6200-CNC shop package to full CNC. Includes 8760 driver box with Linux/EMC
software and power supply plus five 67127 stepper motors. (Computer not included.):12lbs:US$935.00+10%+GST
NOTE:
Please request for a proforma-invoice from us, after deciding what you wish to buy. It will give price in S$ & other details.
Prices are subject to change with out prior notice. Errors & omissions in the price list/proforma/invoice shall be corrected
by seller
With PO (Purchase Order), please send your Cashier’s Cheque or Bank Transfer or through PayPal for the entire order
amount.
If the total order exceeds US$1500, the handling fee will be charged at 5% instead of 10%
Delivery with in Singapore will be at free of cost, for complete machines. For spare part / tools/ accessories, the delivery
charges are at extra. The GST is applicable only for the sales made in Singapore but for the export orders GST will not be
charged.
LATHES
SHERLINE MACHINE TOOLS AND PACKAGES PRICE LIST (Effective October 1, 2003)
1.STANDARD EQUIPMENT: Sherline lathes include the following as standard equipment: 90 VDC motor w/ electronic speed
control, faceplate, drive dog, tool post, pre-sharpened 1/4" high speed steel (HSS) cutting tool, #0 and #1 Morse dead
centers, 4 hex adjustment keys, 2 spindle bars, laser engraved aluminum hand-wheels and 48-page color instruction
manual. Sherline machines operate on any incoming current from 100 to 240 VAC, 50-60 Hz without an external
transformer. All machines and accessories come with a 1-year limited warranty.
2.DIGITAL READOUTS: Any Sherline lathe or mill can be ordered with factory installed Digital Readouts (DRO). Lathes
include 2 encoder hand-wheels on the cross-slide and lead-screw,. Mills include 3 encoder hand-wheels for X, Y and Z
axes. Electronics box includes 3-axis LED readout plus an encoder for continuous readout of spindle RPM. DRO hand-
wheels replace the standard hand-wheels, so in the case of the 4400-series lathes and 5400 and 2000-series mills, the
DRO hand-wheels replace the adjustable “zero” hand-wheels. Electronics can be initialized to work with either inch or
metric machines. 110VAC power supply included. Machines equipped with DRO are denoted by the machine or
machine/accessory package part number followed by the letters “DRO”.
CNC-READY MACHINES: Any Sherline lathe or mill can be ordered with stepper motor mounts in place of the hand=wheels
ready for the installation of NEMA 23 size stepper motors. (Stepper motors, drivers and software are not included.)
Hand=wheels are included for use on the rear shaft of dual shaft stepper motors, but the stepper motors must be
installed before manual control can be achieved. Machines equipped with stepper motor mounts are denoted by the
machine or machine/accessory packages part number followed by the letters “CNC”. See the CNC Price List for additional
CNC components like a driver box and stepper motors. Complete CNC systems including a computer are also available.
A. SHERLINE Lathes
B. SHERLINE LATHE AND ACCESSORY PACKAGES
Sherline lathes can be purchased with three different selections of most popular accessories. Purchasing a
machine/accessory package offers additional price savings compared to purchasing the machine and accessories
separately. The A, B and C packages are described below. Machines in these packages can also be ordered with factory
installed Digital Readouts (DRO) or with stepper motor mounts ready for the application of CNC controls.
1. 4000A (4100A Metric):3.5" x 8" lathe and standard equipment PLUS
2.5" 3-jaw and ¼" tailstock drill chuck:25:US$675+10%+GST
2. 4000A-DRO (4100A-DRO Metric):3.5" x 8" lathe “A” package PLUS factory installed DRO (Digital Readout) on crosslide
and leadscrew:28lbs:US$1000+10%+GST
3. 4000A-CNC (4100A-CNC Metric):3.5" x 8" lathe “A” package PLUS 2 stepper motor mounts installed on lathe ready for
CNC control:28lbs:US$855+10%+GST
4. 4000B (4100B Metric):3.5" x 8" lathe and standard equipment PLUS
items listed above in “B” package:31lbs:US$850+10%+GST
5. 4000B-DRO (4100B-DRO Metric):3.5" x 8" lathe “B” package PLUS
factory installed DRO (Digital Readout) on crosslide and leadscrew:34lbs:US$1175+10%+GST
6. 4000B-CNC (4000B-CNC Metric):3.5" x 8" lathe “B” package PLUS 2 stepper motor mounts installed on lathe ready for
CNC control:34lbs:US$1050+10%+GST
7. 4000C (4100C Metric):3.5" x 8" lathe and standard equipment PLUS
items listed above in “C” package:34lbs:US$1090+10%+GST
8. 4000C-DRO (4100C-DRO Metric):3.5" x 8" lathe “C” package PLUS factory installed DRO (Digital Readout) on crosslide
and leadscrew:37lbs:US$1415+10%+GST
9. 4000C-CNC (4100C-CNC Metric):3.5" x 8" lathe “C” package PLUS 2 stepper motor mounts installed and ready for CNC
control:37lbs:US$1290+10%+GST
10. 4500A (4530A Metric):3.5" x 8" lathe with adjustable “zero” handwheels PLUS 2.5" 3-jaw and ¼" tailstock drill chuck:
25lbs:US$720+10%+GST
11. 4500B (4530B Metric):3.5" x 8" lathe with adjustable “zero” handwheels PLUS “B” accessory package described above:
31lbs:US$900+10%+GST
12. 4500C (4530C Metric):3.5" x 8" lathe with adjustable “zero” handwheels PLUS “C” accessory package described above:
34lbsUS$1145+10%+GST
14. 4400A-DRO (4410A-DRO Metric):3.5" x 17" deluxe lathe “A” package PLUS factory installed DRO (Digital Readout) on
crosslide and leadscrew:36lbs:US$1095+10%+GST
15. 4400A-CNC (4410A-CNC Metric):3.5" x 17" deluxe lathe “A” package PLUS 2 stepper motor mounts installed and ready
for CNC control:36lbs::US$980+10%+GST
17. 4400B-DRO (4410B-DRO Metric):3.5" x 17" deluxe lathe “B” package PLUS factory installed DRO (Digital Readout) on
crosslide and leadscrew:39lbs:US$1280+10%+GST
18. 4400B-CNC (4410B-CNC Metric):3.5" x 17" deluxe lathe “B” package PLUS 2 stepper motor mounts installed and ready
for CNC control:39lbs:US$1160+10%+GST
19.4400C (4410C Metric):3.5" x 17" deluxe lathe PLUS items listed in
“C” package on previous page:41lbs:US$1220+10%+GST
20. 4400C-DRO (4410C-DRO Metric):3.5" x 17" deluxe lathe “C” package PLUS factory installed DRO (Digital Readout) on
crosslide and leadscrew:44lbs:US$1515+10%+GST
21. 4400C-CNC (4410-CNC Metric):3.5" x 17" deluxe lathe “C” package PLUS 2 stepper motor mounts installed and ready
for CNC control:44lbs::US$1400+10%+GST
MILLING MACHINES
C. SHERLINE VERTICAL MILLING MACHINES
DIGITAL READOUTS and CNC-READY MACHINES: All Sherline machines can be ordered equipped with DRO or CNC stepper
motor mounts. See note at top of previous page.
1. 5000 (5100 Metric)Vertical milling machine w/ 10" base:36:US$650.00+10%+GST
2. 5000-DRO (5100-DRO Metric)Vertical milling machine w/ 10" base PLUS factory installed DRO (Digital Readout) on X, Y
and Z axes:39lbs:US$1025.00+10%+GST
3. 5000-CNC (5100-CNC Metric):Vertical milling machine w/ 10" base PLUS 3 stepper motor mounts ready for CNC control:
39lbs::US$880.00+10%+GST
4. 5400 (5410 Metric):Deluxe vertical milling machine w/ 12" base, adjustable “zero” handwheels, 1297 headstock spacer
block, 3072 1/4" Jacobs drill chuck and laser engraved scales (rulers) on base and table:38lbs:US$775.00+10%+GST
5. 5400-DRO (5410-DRO Metric):Deluxe vertical milling machine as above PLUS factory installed DRO (Digital Readout) on
X, Y and Z axes:41lbs:US$1120.00+10%+GST
6. 5400-CNC (5410-CNC Metric):Deluxe vertical milling machine as above PLUS 3 stepper motor mounts ready for CNC
control:41lbs::US$1005.00+10%+GST
8. 2000-DRO (2010-DRO Metric):2000-series vertical mill as above PLUS factory installed DRO (Digital Readout) on X, Y and
Z axes:48lbs::US$1340.00+10%+GST
9. 2000-CNC (2010-CNC Metric):2000-series vertical mill as above PLUS 3 stepper motor mounts ready for CNC control:
48lbs::US$1225.00+10%+GST
D. SHERLINE MILLING MACHINE AND ACCESSORY PACKAGES
Sherline mills can be purchased with a selection of our most popular accessories. The A package is described below.
Machines in this package can also be ordered with factory installed Digital Readouts (DRO) or ready for the application of
CNC controls. Purchasing a machine/accessory package offers additional price savings compared to purchasing the
machine and accessories separately.
1. 5000A (5100A Metric):Standard 3-axis mill with 10" base (Save $45.00):
44lbs:US$950.00+10%+GST
2. 5000A-DRO (5100A-DRO Metric):Standard mill with factory installed DRO (Digital Readout) on X, Y and Z axes, spindle
RPM readout:47lbs::US$1325.00+10%+GST
3. 5000A-CNC (5100A-CNC Metric):Standard mill with 3 stepper motor mounts installed ready for application of CNC motors
and controls:47lbs::US$1180.00+10%+GST
4. 5400A (5410A Metric):Deluxe 3-axis mill with 12" base, adjustable “zero” handwheels, 3072 ¼" drill chuck, 1297
headstock spacer block and laser engraved scales on base and bed:45lbs::US$1020.00+10%+GST
5. 5400A-DRO (5410A-DRO Metric):Deluxe 3-axis mill as described above PLUS factory installed DRO on X, Y and Z axes,
spindle RPM readout:48lbs::US$1365.00+10%+GST
6. 5400A-CNC (5410A-CNC Metric):Deluxe 3-axis mill as described above PLUS 3 NEMA 23 stepper motor mounts ready for
application of CNC:48lbs::US$1250.00+10%+GST
7. 2000A (2010AMetric):8-direction mill with 14" base, adjustable column
and ram for four additional axes of movement in addition to X, Y, Z and
headstock rotation, ¼" drill chuck:52lbs:US$1240.00+10%+GST
8. 2000A-DRO (2010A-DRO Metric):8-direction mill PLUS factory installed DRO (Digital Readout) on X, Y and Z axes:55lbs::
US$1585.00+10%+GST
9. 2000A-CNC (2010A-CNC Metric):8-direction mill PLUS 3 NEMA 23 stepper motor mounts and RPM gage ready for
application of CNC:55lbs::US$1470.00+10%+GST
LATHE & MILLING MACHINE COMBO PACKAGES
E. SHERLINE COMPLETE MACHINE SHOP LATHE, MILL AND ACCESSORY PACKAGES
Sherline mills and lathes can be purchased together along with a selection of Sherline’s most popular shop accessories
to put together a complete machine shop with just one simple order.
6000 SHOP PACKAGES INCLUDE: 4400-series deluxe lathe and 5400-series deluxe vertical mill PLUS the following
accessories:1040 3.1" 3-jaw chuck, 1069 3/8" Jacobs drill chuck, 1074 Steady rest, 1191 Live center, 3002 Cutoff tool and
holder, 3007 3-piece HSS cutting tool set, 1297 mill spacer block, 3013 Step block hold-down set, 3020 5/32" T-driver, 3021
3-piece center drill set, 3052 Fly cutter, 3054 Boring head, 3060 3-piece mill collet set, 3063 Boring tool, 3072 ¼" Jacobs
drill chuck, 3079 3/8" end mill holder, 3551 mill vise, 3700 4" Rotary table, 3750 Tilting angle table, 5327 Sherline
Accessories Shop Guide book, 5330 Safety glasses and 7400 6-piece 3/8" double-ended end mill set. Save $167.00
compared to buying machines and accessories separately.
NOTE: The manual P/N 3700 rotary table is included with CNC-ready packages. To upgrade to CNC-ready rotary table
without motor, specify the P/N 3700-CNC rotary table and add $50.00. For a rotary table with stepper motor already
installed specify P/N 8730 and add $125.00.
6200 SHOP PACKAGES INCLUDE: All items mentioned above except substitute 2000-series mill in place of 5400-series mill.
Save $167.00 compared to buying machines and accessories separately.
1. 6000 (6010 Metric):4400-series lathe, 5400-series mill PLUS accessories listed above. A complete machine shop in
miniature!:93lbs:US$2400.00+10%+GST
2. 6000-DRO (6010-DRO Metric):6000-series shop package above with both machines fitted with factory installed Digital
Readouts:99lbs::US$3045.00+10%+GST
3. 6000-CNC (6010-CNC Metric):6000-series shop package with both machines fitted with stepper motor mounts in place of
handwheels:99lbs::US$2810.00+10%+GST
4. 6200 (6210 Metric):4400-series lathe, 2000-series 8-direction mill PLUS accessory package listed above.:98lbs::
US$2675.00+10%+GST
5. 6200-DRO (6210-DRO Metric):6200-series shop package above with both machines fitted with factory installed Digital
Readouts:104lbs::US$3320.00+10%+GST
6. 6200-CNC (6210-CNC Metric):6200-series package above with both machines fitted with stepper motor mounts in place
of handwheels:104lbs:US$3085.00+10%+GST
7. 8775:Upgrade either 6000-CNC or 6200-CNC shop package to full CNC. Includes 8760 driver box with Linux/EMC
software and power supply plus five 67127 stepper motors. (Computer not included.):12lbs:US$935.00+10%+GST
NOTE:
Please request for a proforma-invoice from us, after deciding what you wish to buy. It will give price in S$ & other details.
Prices are subject to change with out prior notice. Errors & omissions in the price list/proforma/invoice shall be corrected
by seller
With PO (Purchase Order), please send your Cashier’s Cheque or Bank Transfer or through PayPal for the entire order
amount.
If the total order exceeds US$1500, the handling fee will be charged at 5% instead of 10%
Delivery with in Singapore will be at free of cost, for complete machines. For spare part / tools/ accessories, the delivery
charges are at extra. The GST is applicable only for the sales made in Singapore but for the export orders GST will not be
charged.
| SHERLINE products are manufactured at USA. There are many variety of Stand-Alone Machines, Packages, and CNC Ready Machines. Also in these pages you will find CNC Complete Systems. Miniature Machines are gaining importance to carry out precision machining of parts for industries like oil&gas, clock&watch manufacturing/repairing, toys, robotics, home appliances repair , art&craft, jewelry manufacturing, and training aspiring machinists and students at schools. Over the years Sherline Designers have brought out wonderful range of suitable accessories and tools for all Sherline Machines. If you are a beginner, start with simple standard machines with affordable packages. In a year or two, you would find interesting needs to add more accessories and tools. Once you start loving it, you would be in different world, completely absorbed and nothing can distract you to while= away your time otherwise. |
|
| |||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
